Mr. Ed
Member
Joined: 21 Dec 2007
Posts: 77
|
NOS spacer plate
Sorry for the delay in responding. I forget that I have parts on this site. The P/N is C40E-9A589 A
The box says it is for:
'63-'67 260, 289, 289 Hi-Po 4 V.
'68 302 4V.
'69 351W 4 V.
Now these notes are hand written by others. I did look in Bob Mannel's Small block V-8 book and this spacer is called out as one of the three that were used in '64. for the 289. It also says in the 289 Hi-Po addendum that this is the one used for 289 Hi-Po under note 110. It says, "Marked C4OE-9A589-A. PCV fumes routed to the primary bores. Includes C4AZ-9C639-B cap and 97331-S8 clamp for blocking PCV hole if used with road draft tube."
In the carb addendum section it says that this spacer was used on 289 4V & Hi-Po, 302 4V, 64/68 with 1-5/8" bore and a note that says the same thing as the note above.
So in closing it looks like the hand writen notes are not entirely correct, but this spacer may work in those applications.
It is in it's original box with the cap and clamp. $50.00 to include shipping in the continental US.
Later!
Mr. Ed
_________________
No car at this time.
|
