|
|
The time now is Tue Mar 19, 2024 4:49 am |
|
|
Author
|
Thread |
|
|
Bkin
Senior Member
Joined: 10 Mar 2006
Posts: 109
Location: Illinois |
'63 221 parts
I finally partially disassembled my '63 221 so I could move it around the garage. I have these parts available:
Heads-never been off of the block, still has Ford lettering on valves. Original springs/rockers.
Oil pump and pickup.
Two bbl intake basket for crank vent blocked off.
Front Cover
Oil pan
Original Valve covers.
I have not removed the cam, crank, or parts attached to the rotating assembly. (Pistons, rods, ect) Still moves freely.
Block is also available.
This engine ran when removed. Head gaskets started to leak. Oil and fluid removed when removed from car.
The car had 70,000 miles when engine removed.
If you need any of these parts please email kopestcontrol@sbcglobal.net
If you need pics...same email. _________________ 1963 Fairlane 500 4 Door w/'68 J Code 302 4V and FMX
|
Tue May 06, 2008 11:05 am |
|
|
trav1856
Member
Joined: 05 Oct 2007
Posts: 97
|
what would ya want for the whole thing?
|
Wed May 07, 2008 2:29 am |
|
|
Bkin
Senior Member
Joined: 10 Mar 2006
Posts: 109
Location: Illinois |
I'm trying to keep the hope alive. These parts are free to a good home. _________________ 1963 Fairlane 500 4 Door w/'68 J Code 302 4V and FMX
|
Wed May 07, 2008 6:06 am |
|
|
trav1856
Member
Joined: 05 Oct 2007
Posts: 97
|
Well, my dad's driving up to Michigan June 11th or 12th from Oklahoma, depending on where in Illinois you are, he could pick it up for me. I'd take the whole lot block and all. I've got a '63 Fairlane 500, and I plan to keep it as a 221. (there's a 221 in it). This would give me a block to rebuild get it up into shape, swap it out and rebuild the stock block, and swap motors as needed and drive it till it falls apart.
You wouldn't happen to have an engine crane (cherry picker) to load it up for him would ya? (he's disabled and would need help loading it.)
I'd definitely give it a good home.
|
Wed May 07, 2008 6:58 pm |
|
|
trav1856
Member
Joined: 05 Oct 2007
Posts: 97
|
Well, my dad's driving up to Michigan June 11th or 12th from Oklahoma, depending on where in Illinois you are, he could pick it up for me. I'd take the whole lot block and all. I've got a '63 Fairlane 500, and I plan to keep it as a 221. (there's a 221 in it). This would give me a block to rebuild get it up into shape, swap it out and rebuild the stock block, and swap motors as needed and drive it till it falls apart.
You wouldn't happen to have an engine crane (cherry picker) to load it up for him would ya? (he's disabled and would need help loading it.)
I'd definitely give it a good home.
|
Wed May 07, 2008 7:01 pm |
|
|
Bkin
Senior Member
Joined: 10 Mar 2006
Posts: 109
Location: Illinois |
June 11th or 12th will work. The 11th would have to be after 3:00pm, anytime on the 12th(Day Off)I don't have a picker, but with my 15 year old son (6'5" 240lbs) I think we can get the parts loaded. Send me an email to kopestcontrol@sbcglobal.net and we can firm up a time and where to pick up. If he is traveling 44 to St. Louis, and he uses 70 E to Indy, he will drive within 1/2 mile of my house. The Ford O Matic 2 speed is there for the taking also if you want it. _________________ 1963 Fairlane 500 4 Door w/'68 J Code 302 4V and FMX
|
Wed May 07, 2008 10:41 pm |
|
|
Bkin
Senior Member
Joined: 10 Mar 2006
Posts: 109
Location: Illinois |
trav1856: I sent you a PM. _________________ 1963 Fairlane 500 4 Door w/'68 J Code 302 4V and FMX
|
Tue May 13, 2008 12:41 pm |
|
|
|
Forum Rules:
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
|
|
|
|
|
|
|
|
|