Im still in the process of my suspension brake upgrade im having problems locating the right master cylynder for instaling 4 wheel disc brakes i need a big bowled cylender that the lines come off the drivers side the kit i purchased suplied one that exits toward the valve covers that doesnt work it would intefere with the valve cover and oil fill its a 67 w 390 power brakes the stock one exits off the drivers side and bottom but doesnt have the capacity for the 4 calliper 4 wheel disc brakes any sugestions or part #s thanks
Sat Apr 22, 2006 11:38 pm
VoodooGTA Junior Member
Joined: 10 Mar 2006
Posts: 29
Check with Master Power Brakes, they should be able to supply you witha a four wheel disc master cylinder.
Joined: 16 May 2006
Posts: 30
Location: Washington
If you want manual brakes, try a master cylinder froma 1988 Dodge Daytona with four wheel disks. has a 7/8 inch bore for high pressure. They are supposed to be a botl for the early Fords.
Pete _________________ 64 2dr Sedan, 418W, C4, 3.70, Street/Strip, under construction
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
This theme is to be used only for the promotion of Windows(TM) XP and its associated products. -
Read the full disclaimer
I, the developer, take no responsibility for use of this theme against the wishes of Microsoft(R).