Author
|
Thread |
|
|
speedejb
Newbie
Joined: 10 Apr 2006
Posts: 3
Location: Concordia, Kansas |
Wanted Bucket Seat Riser
It is a U shaped mounting bracket that elevates the seat mount nearest the transmission hump. I am told that the bracket is approx. 2 1/2" long by 1 1/2" tall by 1 1/2" wide, is closed on the rear facing end and has a small flange on the mounting surface. Anybody have one? Thanks James
|
Mon Apr 10, 2006 11:41 pm |
|
|
RadMan
Junior Member
Joined: 13 Mar 2006
Posts: 38
Location: Indianapolis |
James,
What year? What model? What Seat?
_________________ 64 Sport Coupe 427 2x4 4speed
White knuckles ride for an old fart.
|
Wed Apr 12, 2006 8:23 pm |
|
|
speedejb
Newbie
Joined: 10 Apr 2006
Posts: 3
Location: Concordia, Kansas |
67 hardtop
Sorry I forgot to include this very important piece of info. I need for a 67 hardtop. My car is a 500 and I am replacing bench seat with buckets. Thanks James
|
Wed Apr 12, 2006 8:52 pm |
|
|
oldracer
Member
Joined: 13 Mar 2006
Posts: 77
Location: Wilhoit Az. |
I used some 1/2" pipe to make risers for my buckets.You can cut it to fit any length.
"Old"
|
Fri Apr 14, 2006 10:07 am |
|
|
thescreenman
Junior Member
Joined: 18 Mar 2006
Posts: 11
Location: Binghamton,New York |
Old,You put me back in time,I used to use some junk socket gave me the chrome look.
|
Sat Apr 29, 2006 8:43 am |
|
|
dave s
Senior Member
Joined: 10 Mar 2006
Posts: 163
Location: Tottenham Ont. Canada |
I used 1"X2" square steel tube ,approx 14" long. mounted to seat tracks and then bolted to floor.
|
Sat Apr 29, 2006 10:36 am |
|
|