Fairlane Owners/Enthusiasts Forum Index
  The time now is Thu Nov 14, 2024 2:13 am   

Fairlane Owners/Enthusiasts Forum Index -> Member Projects

64 wagon build
Goto page Previous  1, 2, 3
  Author    Thread Post new topic Reply to topic
scorcher1967
Member


Joined: 13 Sep 2007
Posts: 52

Got some work done today. Worked on drilling out the spot welds, and separating the wheel wells, and rocker panels, from the post and side.
From the measurments, and such, these parts will weld right into the wagon body, needing only a fill panel from the window regulator panel, to the trim panel in the wagon area.



Post Thu Mar 20, 2008 8:26 pm 
 View user's profile Send private message Send e-mail  Reply with quote  
alienboyfinney
Member


Joined: 18 Jun 2006
Posts: 76
Location: Virginia

Got an update

Post Fri Jun 13, 2008 2:36 pm 
 View user's profile Send private message Yahoo Messenger  Reply with quote  
scorcher1967
Member


Joined: 13 Sep 2007
Posts: 52

Unfortunately, the Fairlane got back burnered. I take on side projects to fund my own cars, and got a few too many things going right now.

First, an 84 yamaha a guy pulled out of his field. $4 a gallon gas prompted a restoration




The corvette got finished, but now I have a 62 MG Midget to do a full restoration on.



I also rebuilt a autolite 4100 1.12 for a 64 K code fairlane, and a autolite 4300 for my 67 390 mustang. Finished detailing the new 4V intake for the 67.



I still plan to have the conversion to 2 doors done by the end of summer, then get it painted over the winter.

Post Fri Jun 13, 2008 10:24 pm 
 View user's profile Send private message Send e-mail  Reply with quote  
scorcher1967
Member


Joined: 13 Sep 2007
Posts: 52

The fairlane goes to the shop friday to start the conversion and body work. About friggin time. I will take pics of the progress.

Post Tue Aug 19, 2008 10:48 am 
 View user's profile Send private message Send e-mail  Reply with quote  
scorcher1967
Member


Joined: 13 Sep 2007
Posts: 52

the passenger side got cut off. the initial test fit went very well.

I will get pics next week, but as far as the sheetmetal goes, it is as straight forward as possible. The windows will be trickier, but not hard. Most likely, it will get the sedan vent window, lenghtened door window, and a removable quarter window. No post, so when the windows are down/out, it will be open from vent window to cargo window. Its not as I originally envisioned, but it will be cool.

Post Thu Sep 04, 2008 11:17 am 
 View user's profile Send private message Send e-mail  Reply with quote  
scorcher1967
Member


Joined: 13 Sep 2007
Posts: 52

Forget the dang camera again. Did some window fitting. Had to pull the quarter vent window from the original door to match the a-pillar angle. This changes the angle on the door window, but no probem, and we have to have a window made to make up for the height difference as well. Same story with the rear window, it will need to be longer and taller. But it looks like it will all come together and have post-less windows. Will definately not forget the camera next week.

Post Sat Sep 13, 2008 6:26 pm 
 View user's profile Send private message Send e-mail  Reply with quote  
scorcher1967
Member


Joined: 13 Sep 2007
Posts: 52
progress

Made some real progress finally.
Test hanging the door and rear panel



Once the door was hung correctly, we marked all the final cuts on the rear panel.



Interesting, but not shocking. The bean counters back in the day used the same rocker panel for all body styles. The indents on the wagons rocker are for the hardtop style rear window guides.



tack welding the panels



more welding and clean up.



All the time test fitting and checking paid off. very straight body lines. I should have taken one of the drivers side with the original doors, not nearly as straight.



A couple of shots of the car with the panel fully welded in. Door operates like factory. There is a slight sag when off the jack. About 1/8th of an inch at the top of the door. We will either fix it when all the rust repair gets done, and adds better structural integrity, or bend it back on a frame rack. (or build up some sub-frame connectors)

Post Fri Sep 26, 2008 7:48 pm 
 View user's profile Send private message Send e-mail  Reply with quote  
abe_lugo
Member


Joined: 05 Jul 2006
Posts: 59
Location: los angeles
Re: progress

How come you don't lower the top to get the smooth hardtop look?
I'm sure you've seen this wagon http://www.cardomain.com/ride/2509270
it was made from a hardtop. I do like all the info your posting, please keep it up!

Post Thu Jun 11, 2009 12:56 am 
 View user's profile Send private message  Reply with quote  
ccain
Junior Member


Joined: 07 Jun 2009
Posts: 29

Any more progress on this car?

Post Mon Jul 06, 2009 6:33 pm 
 View user's profile Send private message  Reply with quote  
scorcher1967
Member


Joined: 13 Sep 2007
Posts: 52

A long time gone, eh? I just picked up the wagon from the body shop yesterday. Almost a year! And guess what...it has not been touched since the last pictures were posted. Mad Thats why I picked it up....not because its done...

It is back at my house, so between the MG project, the 73 fj55, and the Mustang, I will actually start working on it again. After I evict the mice, rabbits, and birds that have taken up residence. Evil or Very Mad
_________________
jason brownhill
www.punishyourmachine.net

Post Tue Aug 25, 2009 10:28 am 
 View user's profile Send private message Send e-mail  Reply with quote  
1320lane
Senior Member


Joined: 17 Mar 2006
Posts: 270
Location: Central Oklahoma

Tell me more about the yard you pulled the donor from. I've got a buddy looking hard for the cab and front doghouse for a '56 COE, a Big Job would be a plus. Looks like you're way up north and west, Montanaish.
_________________
Larry Hampton
______________________________________________

'63 Fairlane 2-dr post. Race car since at least '67. In the process of turning it into a proto-clone Nostalgia Super Stock car with FE power and three pedals.

Post Tue Aug 25, 2009 5:37 pm 
 View user's profile Send private message Send e-mail  Reply with quote  
scorcher1967
Member


Joined: 13 Sep 2007
Posts: 52

quote:
Originally posted by 1320lane:
Tell me more about the yard you pulled the donor from. I've got a buddy looking hard for the cab and front doghouse for a '56 COE, a Big Job would be a plus. Looks like you're way up north and west, Montanaish.


I am up in Severance Colorado. The yard is outside of Greeley. Lots of vintage stuff.
Martin Auto Salvage
(970) 686-2460
_________________
jason brownhill
www.punishyourmachine.net

Post Tue Aug 25, 2009 11:01 pm 
 View user's profile Send private message Send e-mail  Reply with quote  
  Display posts from previous:      
Post new topic Reply to topic

Jump to:  
Goto page Previous  1, 2, 3

Last Thread | Next Thread  >

Forum Rules:
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum

 

Powered by phpBB © 2001 phpBB Group
phpXP2 Template by Vereor.

This theme is to be used only for the promotion of Windows(TM) XP and its associated products. - Read the full disclaimer
I, the developer, take no responsibility for use of this theme against the wishes of Microsoft(R).

Create your own free forum now!
Terms of Service Purchase Ad Removal Forum Archive Report Abuse